Tuesday, 25 June 2019
Tenfil TF 200

TENFIL Pâte en dispersion aqueuse

TENFIL TF200 c’est une pâte en dispersion aqueuse (sans ajout de solvants), qu’on applique sur les filets pour améliorer l’étanchéité. Disponible pour 3 applications spécifiques (eau – air – gaz), cette pâte est fournie aux clients dans des conteneurs spécifiques.


SPECIAL PROPERTIES

  • Résistance excellente à la plupart des solvants
  • Pas inflammable
  • Atoxique
  • Facile à appliquer


TECHNICAL INFORMATION    
Properties   Value
  APPEARANCE   White paste
  SOLID CONTENT   50 – 55%
  pH   4 – 6
  VISCOSITY   12000 +/- 1000 cP (metodo Brookfield)
  DENSITY   1,07-1,08 gr/cm3 @ 20°C
  SURFACE TENSION   38 dyn/cm
  FLASH POINT   Not applicable
  BOILING POINT   100°C (212°F)
  STIFFNESS POINT   About 0°C
  COMPOSITION   PTFE-based aqueous dispersion

DRYNG TIME
  TEMPERATURE °C   FORCED AIR m3/min   DRYING TIME   END POLYMERIZATION  
  80   9   80 seconds   20 minutes  
  50   9   120 seconds   2 hours  
  20   0   1 hour   12 hours  

APPLICATION NOTES
  Measure   Nr. Pz. Per kg
  1/8 “   12500
  1/4 “   7000
  3/8 “   6660
  1/2 “   3350
  3/4 “   2800
  1 “   2500

SAFETY
TENFIL TF200 should be handled like other Lineplus PTFE resin. When PTFE resin are heated to temperatures above
350°C, a small amount of decomposition products, which may be harmful, are given off. Avoid inhalation of these
fumes. Ovens and process equipment should be vented and adequate ventilation provided in the working area. For
further information refer to the Lineplus PTFE material safety data sheet.

STORAGE AND STABILITY
TENFIL TF200 is stable for one year if stored in original unopened container at temperatures between +4°C - +35°C
(39,2°F – 95°F).

PACKAGING
Kg 10 - Wide-mouthed bucket with lid.
 

General Info

General Catalog Online

Maceplast Romania S.A.

Judet Ilfov | Otopeni | Bucuresti | Romania
Tel. +40 21 352 45 53
Fax +40 21 352 45 56