Teksealing
Not only virgin PTFE, but mainly compounds with bronze, carbon glass fiber.
Format PDF - 323 Kb
GPS | Double acting seal profile
| DH9 | dh9 | L+0.2 | G | r | O-Ring | |||
| GPS-L | GPS | GPS-P | 0÷200 Bar | 0÷400 Bar | ||||
| 15÷39.9 | 8÷14.9 | D-4.9 | 2.2 | 0.6÷0.4 | 0.4÷0.3 | 0.4 | 1.78 | |
| 40÷79.9 | 15÷39.9 | D-7.5 | 3.2 | 0.8÷0.5 | 0.5÷0.3 | 0.6 | 2.62 | |
| 80÷132.9 | 40÷79.9 | 15÷39.9 | D-11.0 | 4.2 | 0.8÷0.5 | 0.5÷0.3 | 1.0 | 3.53 |
| 133÷329.9 | 80÷132.9 | 40÷79.9 | D-15.5 | 6.3 | 1.0÷0.6 | 0.6÷0.4 | 1.2 | 5.34 |
| 330÷669.9 | 133÷329.9 | 80÷132.9 | D-21.0 | 8.1 | 1.0÷0.6 | 0.6÷0.4 | 1.8 | 6.99 |
| 670÷999.9 | 330÷669.9 | 133÷329.9 | D-24.5 | 8.1 | 1.2÷0.8 | 0.8÷0.5 | 1.8 | 6.99 |
| 670÷999.9 | 330÷669.9 | D-28.0 | 9.5 | 1.4÷0.8 | 0.8÷0.6 | 2.0 | 8.40 | |
GPR | Essentially one-way seal profile
| DH9 | dh9 | L+0.2 | G | r | O-Ring | |||
| GPR-L | GPR | GPR-P | 0÷200Bar | 200÷400 Bar | ||||
| 17÷26.9 | 8÷16.9 | D-4.9 | 2.2 | 0.5÷0.3 | 0.4÷0.2 | 0.4 | 1.78 | |
| 27÷59.9 | 17÷26.9 | D-7.3 | 3.2 | 0.7÷0.3 | 0.5÷0.2 | 0.6 | 2.62 | |
| 60÷199.9 | 27÷59.9 | 17÷26.9 | D-10.7 | 4.2 | 0.8÷0.4 | 0.5÷0.3 | 1.0 | 3.53 |
| 200÷255.9 | 60÷199.9 | 27÷59.9 | D-15.1 | 6.3 | 0,9÷0.6 | 0.6÷0.4 | 1.2 | 5.34 |
| 256÷669.9 | 200÷255.9 | 60÷199.9 | D-20.5 | 8.1 | 1.0÷0.6 | 0.7÷0.4 | 1.8 | 6.99 |
| 670÷999.9 | 256÷669.9 | 200÷255,9 | D-24.0 | 8.1 | 1.1÷0.8 | 0.8÷0.5 | 1.8 | 6.99 |
| 670÷999.9 | 256÷669.9 | D-27.3 | 9.5 | 1.2÷1.0 | 1.0÷0.6 | 2.0 | 8.40 | |
GCS | Double acting seal profile
| d h9 | D H9 | L+0.2 | G | r | 0-Ring | |||
| GCS-L | GCS | GCS-P | 0÷200 Bar | 200÷400 Bar | ||||
| 8÷18.9 | 3÷7.9 | d+4.9 | 2.2 | 0.4÷0.3 | 0.3÷0.2 | 0.4 | 1.78 | |
| 19÷37.9 | 8÷18.9 | d+7.3 | 3.2 | 0.5÷0.3 | 0.3÷0.2 | 0.6 | 2.62 | |
| 38÷199.9 | 19÷37.9 | 8÷18.9 | d+10.7 | 4.2 | 0.7÷0.4 | 0.4÷0.2 | 1.0 | 3.53 |
| 200÷255.9 | 38÷199.9 | 19÷37.9 | d+15.1 | 6.3 | 0.8÷0.6 | 0.6÷0.4 | 1.3 | 5.34 |
| 256÷649.9 | 200÷255.9 | 38÷199.9 | d+20.5 | 8.1 | 0.8÷0.6 | 0.6÷0.4 | 1.8 | 6.99 |
| 650÷999.9 | 256÷649.9 | 200÷255.9 | d+24.0 | 8.1 | 0.9÷0.7 | 0.7÷0.4 | 1.8 | 6.99 |
| 650÷999.9 | 256÷649.9 | d+27.3 | 9.5 | 1.0÷0.8 | 0.8÷0.6 | 2.5 | 8.40 | |
GCR | Essentially one-way seal profile
| d h9 | D H9 | L+0.2 | G | r | 0-Ring | |||
| GCR-L | GCR | GCR-P | 0÷200 Bar | 200÷400 Bar | ||||
| 8÷18.9 | 3÷7.9 | d+4.9 | 2.2 | 0.6÷0.4 | 0.4÷0.2 | 0.4 | 1.78 | |
| 19÷37.9 | 8÷18.9 | d+7.3 | 3.2 | 0.8÷0.5 | 0.5÷0.3 | 0.6 | 2.62 | |
| 38÷199.9 | 19÷37.9 | 8÷18.9 | d+10.7 | 4.2 | 0.8÷0.5 | 0.5÷0.3 | 1.0 | 3.53 |
| 200÷255.9 | 38÷199.9 | 19÷37.9 | d+15.1 | 6.3 | 1.0÷0.6 | 0.6÷0.4 | 1.3 | 5.34 |
| 256÷649.9 | 200÷255.9 | 38÷199.9 | d+20.5 | 8.1 | 1.0÷0.6 | 0.6÷0.4 | 1.5 | 6.99 |
| 650÷999.9 | 256÷649.9 | 200÷255.9 | d+24.0 | 8.1 | 1.2÷0.8 | 0.8÷0.6 | 1.5 | 6.99 |
| 650÷999.9 | 256÷649.9 | d+27.3 | 9.5 | 1.4÷1.0 | 1.0÷0.7 | 2.5 | 8.40 | |
GR/C | Scraper
| d h9 | DH9 | L+0.2 | d1 H1 1 | r | O-Ring |
| GR/C | |||||
| 6÷11.9 | d+4.8 | 3.7 | d+1.5 | 0.4 | 1.78 |
| 12÷64.9 | d+6.8 | 5.0 | d+1.5 | 0.7 | 2.62 |
| 65÷250.9 | d+8.8 | 6.0 | d+1.5 | 1.0 | 3.53 |
| 251÷420.9 | d+12.2 | 8.4 | d+2.0 | 1.2 | 5.34 |
| 421÷650.9 | d+16.0 | 11.0 | d+2.0 | 1.5 | 6.99 |
| 651÷999.9 | d+20.0 | 14.0 | d+2.5 | 2.0 | 8.40 |
GPS/R | Rotary seal profile
| D H9 | d h9 | L+0.2 | r | G | 0-Ring | ||
| Serie | 0÷200 Bar | 200÷300 Bar | |||||
| GPS/R-0 | 6÷18.9 | D-4.9 | 2.2 | 0.3 | 0.3÷0.2 | 0.15÷0.1 | 1.78 |
| GPS/R-1 | 19÷37.9 | D-7.5 | 3.2 | 0.5 | 0.6÷0.4 | 0.3÷0.2 | 2.62 |
| GPS/R-2 | 38÷199.9 | D-11.0 | 4.2 | 0.7 | 0.6÷0.4 | 0.3÷0.2 | 3.53 |
| GPS/R-3 | 200÷255.9 | D-15.5 | 6.3 | 1.0 | 0.8÷0.6 | 0.4÷0.3 | 5.34 |
| GPS/R-4 | 256÷649.9 | D-21.0 | 8.1 | 1.2 | 0.8÷0.6 | 0.4÷0.3 | 6.99 |
| GPS/R-5 | 650÷999.9 | D-28.0 | 9.5 | 1.5 | 1.2÷0.9 | 0.6÷0.5 | 8.40 |
GCS/R | Rotary seal profile
| d h9 | D H9 | L+0.2 | r | G | 0-Ring | ||
| Serie | 0÷200 Bar | 200÷300 Bar | |||||
| GCS/R-0 | 6÷18.9 | d-4.9 | 2.2 | 0.3 | 0.3÷0.2 | 0.15÷0.1 | 1.78 |
| GCS/R-1 | 19÷37.9 | d-7.5 | 3.2 | 0.5 | 0.6÷0.4 | 0.3÷0.2 | 2.62 |
| GCS/R-2 | 38÷199.9 | d-11.0 | 4.2 | 0.7 | 0.6÷0.4 | 0.3÷0.2 | 3.53 |
| GCS/R-3 | 200÷255.9 | d-15.5 | 6.3 | 1.0 | 0.8÷0.6 | 0.4÷0.3 | 5.34 |
| GCS/R-4 | 256÷649.9 | d-21.0 | 8.1 | 1.2 | 0.8÷0.6 | 0.4÷0.3 | 6.99 |
| GCS/R-5 | 650÷999.9 | d-28.0 | 9.5 | 1.5 | 1.2÷0.9 | 0.6÷0.5 | 8.40 |
Bearing tapes
For the heaviest applications in the hydraulic field. motion control and mechanical field. Guarniflon® developed a new family of products. made by special PTFE compounds and devoted technologies. in order to fulfil Guarniflon® customers’ requirements.
Compounded PTFE materials with bronze. carbon. graphite or other fillers are designed to enhance properties such as:
- wear resistance
- coefficient of friction
- compression strength
Thickness from 1.5 mm. up to 5 mm. Width from 4 mm. up to 300 mm.
Available:
- with sharp edges
- with chamfers on 2 or 4 angles
- knurled on 1 or 2 sides
- etched on 1 or 2 sides
|
Rolls Length
|
|
|
Tickness mm.
|
Length mt.
|
|
1.5
|
35
|
|
2
|
25
|
|
2.5
|
20
|
|
3
|
16
|
|
4
|
24
|
Materials
VIRGIN PTFE
Good chemical resistance. Fair wear resistance.
Excellent coefficient of friction.
PTFE + GLASS FIBER
Enhanced wear resistance. Enhanced chemical resistance. Good compression resistance.
PTFE + CARBON
Good thermal and electrical conductivity. Good resistance to deformation. Excellent resistance to load with low coefficient of friction and high wear resistance.
Enhanced chemical resistance.
PTFE + BRONZE
Enhanced compressive strength. Good wear resistance and high thermal conductivity.
Guarniflon® has available more than 80 different compounds providing solutions to the most tribological applications. Available on request.
